Alternative to pasteurization

UV as an alternative to pasteurization: disinfection of low-light-transmittance liquids

食品生產線.png

Pasteurization has been widely used in liquid foods such as dairy products and juice.

As a heat treatment technology, pasteurization has increasingly limited inherent limitations, such as the potential damage to heat-sensitive nutrients and flavors, as well as relatively high energy consumption. These limitations have prompted the industry to seek better alternatives or supplementary solutions.

Ultraviolet (UV) disinfection, as a highly effective and environmentally friendly non-thermal sterilization technology, has garnered increasing attention.

UV disinfection physically destroys microbial genetic material, achieving sterilization and preserving the inherent sensory properties and nutritional value of foods that are considered natural, healthy, and minimally processed.

The core principle of pasteurization is to exploit the fact that pathogenic microorganisms (such as bacteria and viruses) are generally heat-sensitive. By heating food at a specific temperature below 100°C (typically 60-85°C) for a set period of time, the process kills most pathogenic and spoilage bacteria, thereby extending the shelf life and improving food safety.

Pasteurization is not complete sterilization. It aims to reduce the microbial population to a safe level and inactivate some enzymes. However, some heat-resistant microorganisms (such as certain bacterial spores) and non-pathogenic bacteria may remain.

There are two main types of pasteurization processes:

· Low-Temperature Long-Time (LTLT): For example, milk is heated to 62-65°C for 30 minutes.

· High-Temperature Short-Time (HTST): For example, milk is heated to 72-75°C for 15-20 seconds, or even shorter times at higher temperatures (such as 80-85°C).

Ultraviolet Disinfection as an Alternative to Pasteurization

Ultraviolet disinfection has been widely used in the treatment of drinking water and water used in food and beverage production, serving as an effective alternative or important supplement.

食品.png

For heat-sensitive products such as juice, tea, and plant-based protein beverages, UV disinfection, as a non-thermal sterilization technology, has the potential to preserve the product's original flavor, color, and nutritional content.

Traditional pasteurization can lead to the loss of heat-sensitive nutrients such as vitamin C and alter the flavor of juice, but UV treatment has the potential to avoid these problems.

Low-transmittance liquid disinfection solutions: Juice clarity, color, pulp content, suspended particulate matter, and sugar and acid concentrations all affect the penetration depth and effective dose of UV light.

For example, darker juices or those containing higher amounts of suspended matter absorb and scatter UV light more strongly, resulting in reduced sterilization effectiveness.

Therefore, specialized UV reactor designs (such as thin-film flow, turbulent flow technology, or optimized lamp layout) are often required to ensure uniform UV dose distribution throughout the entire liquid flow and achieve the required sterilization threshold.

In addition, the optimal UV treatment parameters (dosage, flow rate, etc.) for different types of juice require extensive experimental verification.

Killing Efficiency Against Common Pathogens and Spoilage Organisms:

Assuming sufficient UV dose, UV disinfection has a good killing effect on a wide range of microorganisms, including bacteria, viruses, yeasts, and fungi. Its effectiveness depends on UV intensity, exposure time, UV transmittance of the liquid, and the sensitivity of the microorganisms themselves. UV disinfection can be highly effective for clear liquids.

Killing Efficiency Against Heat-Resistant Bacteria and Spores:

Bacterial spores are much more resistant to UV than their vegetative cells. Conventional UV doses have limited killing effect on spores. Effective inactivation of spores typically requires significantly higher UV doses or the use of enhanced technologies such as medium-pressure UV light.

Previous
Reverse Osmosis

Next
UV photochemical reaction

Municipal Municipal Wastewater Municipal water supply Recycled Water Reuse Township water supply and drainage Industrial Park New pollutant control Water ecological restoration project

Industry Pretreatment of industrial high-difficulty wastewater Pesticide Industry API pharmaceuticals Chemical waste salt purification Food & Beverage Industry Pharmaceutical Purified water Chip Fabrication Oilfield reinjection water Industrial zero emissions

Commercial Secondary water supply Pool & Aquarium High-quality drinking water POE/POU Aquaculture Cooling Circulating water Laboratory applications

UV-AOPs Wastewater Biodegradability Pretreatment of highly toxic industrial wastewater Chemical active agents Cyanide Organic Complexes

Craftsmanship UV disinfection UV photolysis UV Advanced Oxidation Reverse Osmosis Alternative to pasteurization UV photochemical reaction Ozone oxidation

Resource Recycling waste plastics Construction waste Renovation waste

Municipal WSH UV Disinfection System WTV UV Disinfection Vertical System ZL UV Disinfection System Clear Medium Pressure UV Disinfection System MOL Ceramic Plate CD Ozone Generator UV-AOP Advanced Oxidation System D.FITE Cloth Filter

Industry ZL UV Disinfection System Clear Medium Pressure UV Disinfection System UV-AOP Advanced Oxidation Extrem Medium Pressure UV Disinfection System EX-U UV Sterilizer EX-UPW-TOC UV TOC System MOM Ceramic Plate CD Ozone Generator MOS Ceramic Plate CD Ozone Generator UV-Fenton UV-Oxidation

Commercial EX-L UV Sterilizer EX-U UV Sterilizer ZL UV Disinfection System CLEAR Medium pressure UV Disinfection System OneUV UV Sterilizer Extrem Medium pressure UV Disinfection System UV-AOP Advanced Oxidation MOS Ceramic Plate CD Ozone Generator COG Ceramic Plate CD Ozone Generator

Photochemistry UV-Fenton Medium-pressure UV-Oxidation UV Photolysis Pasteurization UV Alternatives UV Photocatalysis Low Pressure UV-Oxidation

Resource Recycling AI Optical Sorter Al high-speed sorting robot AI heavy-duty sorting robot

Others SATBR Integrated Wastewater Treatment System D.FITE Cloth Filter Modular Wastewater Treatment System ModuOzone Ceramic Plate CD Ozone Generator

After-Sales Services Spare parts replacement Product Repair System Support Renovation Regular maintenance Software Upgrade

Technical Support Process Support Product Training Research & Development Small Test Pilotscale experiment Online dose monitoring UV dose design

Channel Services Municipal Industry Business OEM

Spare parts Low Pressure lamps Low Pressure Amalgam Lamps Medium Pressure Mercury Lamp VUV Low-pressure Mercury Lamp（185nm） Quartz sleeve Ballasts UV Intensity Sensor UV transmittance tester Sealing accessories Other Spare parts replacement

Industry Applications

UV as an alternative to pasteurization: disinfection of low-light-transmittance liquids

About Us

Applications

Products

News

Services

Resources

Contact us